| Rita objektets ytterlinjer precis som du skulle ha gjort med papper och
penna. Intelligenta låsningsmöjligheter känner automatiskt av linjernas
egenskaper och fyller i modellen. På så sätt skapas en geometrisk figur i
3D. I den senaste versionen har menystrukturen förbättrats och många
dialogboxar kan vara öppna samtidigt som du arbetar i modellen vilket gör
det ännu enklare att utforska olika designalternativ. |
|
|
|
|
Tryck/Drag |
|
"Tryck/Drag"-funktionen, precis som namnet antyder, gör det möjligt att helt enkelt klicka på en
modell och trycka eller dra för att skapa geometriska 3D-modeller. Med
"Tryck/Drag"-funktionen
kan du därför snabbt skapa komplexa 3D-modeller genom att trycka eller dra i en 2D-modells form och kanter. |
| |
|
Sandbox |
Sandbox är en uppsättning verktyg för modellering av terräng och andra organiska
former.
I sandlådan kan du:
Ta in er utsättningsdata och skapa en yta från konturerna.
Skapa berg och åsar med det nya verktyget Stamp.
Gör 2D-geometri till komplexa 3D-ytor med Drape-verktyget.
Använd Add-verktyget till att lägga till detaljer i ytan.
Flip Edge-verktyget låter dig flippa de invändiga linjerna mellan två närliggande trianglar för
att ändra en ås till en dal eller tvärt om.
|  |
| |
|
Snabb import och export av DWG- och DXF-filer |
|
SketchUp tillåter dig att både importera DWG-ritningar samt att exportera objekt som är skpade i
SketchUp till DWG-formatet. SketchUp är därför ett lättanvänt komplement till
AutoCAD, AutoCAD LT
och andra CAD-mjukvaror. |
| |
|
3DS-export |
|
Du har även möjlighet att exportera dina SketchUp-modeller till 3DS-format. Därmed kan du upprätthålla material
och texturmappningsinformation, ljus och kameror vid export till bland annat 3D Studio MAX och Autodesk
VIZ. |
| |
|
Verktyg för kameraplacering |
|
Med verktyget för kameraplacering kan du placera en kamera för att bestämma från vilken punkt eller
position som modellen ska ses. Du kan dessutom se dig om inuti modellen med hjälp av detta verktyg |
| |
|
Bildspel |
| Bildspels-teknik gör det möjligt att skapa
animeringar av modellerna utifrån vissa vyer. De här animerade
presentationerna utgör dynamiska presentationer av en modell och kan
vara oerhört användbara när arbeten ska presenteras eller när man
vill studera skuggor. SketchUps teknologi gör det möjligt att skapa
dessa animeringar inom loppet av minuter. |
|
|
|
| |
|
Verktygsbox för skuggor |
| ISketchUp finns en verktygsbox för interaktiva skuggor. Den här verktygsboxen gör att du kan generera
bilder med ett större djup. Du kan även studera solljus och allting sker i realtid! |
|
|
|
|
Nyheter i SketchUp 7: |
|
SketchUp innehåller funktionalitet för profillinjer och förlängda kantlinjer för att på så sätt skapa ett skissutseende.
Det finns även verktyg för användaranpassade komponenter, texturer, färger och snabbtangenter. |
Crossing lines break automatically
When you draw a line that crosses another line on the same plane, both lines are split where they meet. Most folks think this is how SketchUp should have worked from the start. Well, now it does. Say goodbye to tracing over edges to make them split.
Configure objects with Component Options
Some Dynamic Components are hooked up to the new Component Options dialog box. Instead of breaking out the modeling tools to make a change, just choose options and watch the component reconfigure automatically. It's modeling without the mess.
PRO Build components that know what they are
With Google SketchUp Pro 7, you can turn any component into a Dynamic Component. Endowing your models with behaviors like animation and smart scaling makes them easier for you and everyone else to use. If you can use a spreadsheet, you can build Dynamic Components.
SketchUp 7: Sharing and Collaboration
Search the 3D Warehouse
We've added Google 3D Warehouse Search to the Component Browser, which gives you access to jillions of models (give or take a zillion) right inside SketchUp. You can also save particular searches as Favorites, making it easier to find stuff quickly later on.
Download models locally
You can save anything you find on the 3D Warehouse to your local drive, making it easy to work even if you happen to be offline. Better yet, you can download models to local collections up to a dozen at a time.
Custom Templates
You can include all of your organization's proprietary Styles, Watermarks and components in a custom Template so that every member of your team has everything they need, right from the start. In SketchUp 7, saving custom templates is a breeze.
PRO LayOut 2: Create professional presentation documents, fast
Work bigger with Vector Rendering
LayOut 2 makes it easier to work with complex models and larger paper sizes. Switch to Vector Rendering when you want clean, resolution-independent drawings. If you want to tweak the line weights a bit, you can "explode" your model to vector edges and tweak it line by line.
Curves are fun again
Its boring name notwithstanding, LayOut 2's new-and-improved Line tool has superpowers. It's simple and intuitive, and it incorporates everything you already love about SketchUp's inference system. Try it and you'll see -- it's like taking off your mittens to tie your shoes.
Move, rotate and scale
We've completely redesigned LayOut's geometric manipulators to be easier to use and to stay out of your way. You can move, scale and rotate anything on your page without changing tools, and the new "heads-up" display helps with accuracy as you work.
In-place Group edit
Use the Select tool to double click a group to edit its contents. You can move, scale, rotate and copy/paste inside the group, then click outside to go back to the rest of your file. No more ungrouping and regrouping just to make a change.
Explode
Right-click on any placed SketchUp model and choose Explode. Depending on how it was rendered, you'll get vector lines, raster images, or a combination of both. It's the easiest way to get vector geometry to edit directly, hands-down.
|
 |
Scale without stretching
New Dynamic Components are special: they're programmed to know what they are. When you use the Scale tool on a dynamic staircase, it automatically adds or removes steps as you make it bigger or smaller. No more stretching, no more distortion. |
 |
Introducing the Interact tool
Clicking things is fun – especially with the new Interact tool. Some Dynamic Components can perform animations, rotate, move, resize, change color or move to a scene in your model when you click on them with Interact. |
 |
PRO Custom attributes
Need to keep track of metadata like Part Number, Weight or Cost in your models? With SketchUp 7 Pro, you can tag your models with luscious meaning and information to make them more useful and easier to carry forward in your workflow.
Learn more about using Dynamic Components in Google SketchUp 7 » |
 |
Take (and give) credit
Tag your models with your nickname so that people will know who built them no matter where they end up. And since Credits automatically keeps track of the stuff you use to build your own models, it's easier than ever to give credit to your collaborators. |
 |
PRO Generate reports
Use the metadata embedded in your components to create tabular reports. In SketchUp Pro 7, you can export detailed lists of every named entity and their corresponding attributes in either HTML or CSV format, for use in your favorite spreadsheet application. |
And that's not all!
We improved the inferences to make them more visible and easier to use. There's a new area of the Status bar that tells you more about your model. The VCB is now called Measurements, and you can change its location on your screen. You can make textures unique, and choose to edit them in the photo-editor of your choice. You can apply anti-aliasing to textures to make them look better from a distance. See the complete list of changes in SketchUp 7 » |
 |
Long live Measurements
You know the little text box in the lower-right corner of the SketchUp modeling window? The one you use to enter dimensions, angles and other stuff? Now you can key in numbers in LayOut just like you do in SketchUp. Be accurate to your heart's content. |
 |
Editable paths
Double click any shape in LayOut 2 to edit its control points. Drag any point onto an adjacent one to make the first one disappear. Hold down Ctrl (Option on a Mac) to add a point or make a smooth curve pointy. Reshape any curve fluidly by dragging its handles. Delicious, no? |
 |
Export to images
Need JPEGs or PNGs of your pages? LayOut 2 includes direct export to these formats, which saves you from having to use another tool to rasterize your PDFs. We suggest using your extra time to do something for yourself. Maybe buy a hammock. |
 |
Improved Text
For LayOut 2, we've fixed problems and added some new functionality for text. You can now create both bounded (confined to a box) and unbounded text, depending on your need. Text can be aligned to top, bottom, left, right or center within its bounding box, both vertically and horizontally. |
And that's not all!
We made improvements to almost every corner of LayOut in its first non-Beta release: rectangle pick targets, styles handling, text editing, layer visibility, toolbars, presentation mode, overall stability, view performance, memory management -- you name it, we made it better.
Learn more about LayOut 2 » |
| |
|
Nyheter i SketchUp
5.0 |
- "Snappy Dialogs" Ett sätt att spara plats på
arbetsytan
- "Sandbox" Ett helt nytt sätt att skapa
terräng och organiska ytor
- "Extension Manager" För att ladda in externa
funktioner.
- "Component and Group Locking" Lås komponenter
och grupper för att förhindra oavsiktlig redigering.
- "Edit Rendering Styles" Nya funktioner bland
annat "Depth Cue" som gör linjer tunnare ju längre
ifrån kameran de är.
- "Component Outliner" Visar kompnenter och
grupper i trädstruktur.
- "Import och Export" Nya funktioner för bland
annat 3D Studio Max.
- "Push/Pull" Tillsammans med CTRL skapar den ny
geometri
|
|
|
|
För mer information, kontakta oss!
Vill du ha en kurs om den här produkten? Klicka här.
|
|
